Brand:NTH
Precision collet chuck with built-in rotary air cylinder.
No need to install an extra cylinder, a draw tube or an air feeder.
Chuck models for 5C, 16C, B42, B60 or B80 collets.
Chucks are with through hole for bar parts.
Self-lock design on the close side to offer high safety.
High resistance to coolant fluid and chips penetration.
JAP200 Introduction
NTH JAP200 Cylinder Integrated Air Collet Chuck provides you with irreplaceable convenience to set up your power collet chuck system. JAP200 Collet Chuck integrates itself a high speed rotary cylinder, saving you from installing an extra cylinder, a drawtube or an air feeder. With its real front-mounting design, the installation for a power collet chuck system is revolutionarily easier than ever.
JAP200 Specification
| Model | JAP206-5C | JAP207-16C | JAP207-B42 | JAP208-B60 | JAP210-B80 |
| A | 168(6.61〞) | 203(7.99〞) | 197(7.76〞) | 214(8.43〞) | 247(9.72〞) |
| B | 130(5.12〞) | 160(6.30〞) | 155(6.10〞) | 170(6.69〞) | 200(7.87〞) |
| C | 26(1.02〞) | 40(1.57〞) | 42(1.65〞) | 60(2.36〞) | 80(3.15〞) |
| D | 4.5(0.18〞) | 4.5(0.18〞) | 4.5(0.18〞) | 4.5(0.18〞) | 5.0(0.20〞) |
| E | 101(3.98〞) | 113(4.44〞) | 138(5.43〞) | 148(5.83〞) | 151(5.94〞) |
| F | 55(2.17〞) | 65(2.56〞) | 77(3.03〞) | 85(3.35〞) | 80(3.16〞) |
| G | 116(4.57〞) | 136(5.35〞) | 146(5.76〞) | 164(6.46〞) | 197(7.76〞) |
| H(P.C.D) | 147(5.79〞) | 176(6.93〞) | 172(6.77〞) | 186(7.32〞) | 226(8.90〞) |
| Mounting bolts | 4H-M8(Front) | 3H-M10(Front) 3H-M10(Rear) | 3H-M10(Front) 3H-M10(Rear) | 3H-M10(Front) 3H-M10(Rear) | 6H-M10(Front) |
| Working collet | 5c COLLET (ANSI) | 16c COLLET (ANSI) | (DIN6343 173E) | (DIN6343 185E) | (DIN6343 193E) |
| Max RPM | 3600 | 2800 | 2500 | 2000 | 1500 |
| Air Pressure | 3-8kg/cm² (43-114psi) | 3-8kg/cm² (43-114psi) | 3-8kg/cm² (43-114psi) | 3-8kg/cm² (43-114psi) | 3-8kg/cm² (43-114psi) |
| Max clamping dia | 26mm(1.02〞) | 40mm(1.57〞) | 42mm(1.65〞) | 60mm(2.36〞) | 80mm(3.15〞) |
| Piston Area | 130cm²(20.2in²) | 155cm²(24.0in²) | 280cm²(43.4in²) | 304cm²(47.6in²) | 356cm²(55.2in²) |
| Clamping force | 3465kgf@7kg/cm² (7623lbf@100psi) | 4078kgf@7kg/cm² (8971lbf@100psi) | 5572kgf@7kg/cm² (12258lbf@100psi) | 6072kgf@7kg/cm² (13358lbf@100psi) | 7040kgf@7kg/cm² (15450lbf@100psi) |
| N.W. | 10kgs(22lbs) | 14kgs(31lbs) | 17kgs(37lbs) | 21kgs(46lbs) | 32kgs(71lbs) |
Subject to technology changes without prior information
Non-standard requirements can be made
